BLACK & WRAP SHAMPOO

Before using Black & Wrap Shampoo, as always before washing with manual shampoo, carry out a thorough prewash with “Foam Gun Prewash”. After the prewash you can proceed to manually wash the car.

We suggest using the two-bucket washing method (one with the shampoo/water solution and the other with just clean water) in combination with a microfiber glove such as our Double Face or a sponge/ pad like our Microfiber Pad.
Using the grate in the bucket helps remove dirt and impurities from the glove or sponge by allowing it to settle at the bottom of the bucket.

Follow these steps to make the best use of the product:

• Prepare the water and shampoo solution: dilute 4 caps of product in 8L of water (1:300) in a bucket.
• Proceed with a thorough manual wash, washing one panel at a time, always in the shade, with the vehicle wet and starting from top to bottom
• For each panel, rinse the sponge or wash glove in the bucket containing clean water, the coarse dirt particles remain trapped in the sponge itself and could have an abrasive effect or worse create scratches on the paint, in the following steps.
• Work one panel at a time, paying attention to cleaning all the components, including logos and details.
• The high lubricating property creates a slippery surface that allows the glove to slide without the risk of creating mini-scratches or swirls
• Complete the wash on the entire car without ever letting the shampoo dry on the bodywork.

Take some time to complete this operation calmly: do it carefully, you will get a better result and speed up the washing operation because you will not have to carry out further steps to cover forgotten areas or correct errors

• On a particularly dirty or dull surface:also pour a few drops on the dampened glove and spread it on the wet vehicle.
• Rinse the vehicle with high pressure starting from top to bottom. Its formula rich in mineral sequestrants allows it to drastically prevent the formation of limescale stains (waterspots) during the drying phase, leaving the surface purified.

Drying:

• Dispense “Exterior Quick Detailer” onto the wet surface and use the “Super Dryer” microfibre cloth for drying for quick and effective drying in total safety.
• Use two Super Dryer drying cloths: one dedicated to the bodywork, another dedicated to the windows, in order to leave the latter as dry as possible. You can also use Super Dryer to finish profiles or delicate details.
• When drying the side of the car or the lower parts, fold the drying cloth to prevent it from touching the ground and picking up dirt that could create scratches.