Can I use Iron Remover before applying a wax or protectant?
Yes, this operation must always be carried out before applying a wax or protective agent as it promotes adhesion by eliminating ferrous particles on the surface.
When should I use Iron Remover on rims and how often?
When once you have washed the rims with Wheel&Tire Cleaner you realize that there is still some dirt on the rim that cannot be eliminated, not even with the mechanical action of a brush or brush: in this case you are faced with ferrous contamination that must be eliminated with Iron Remover .
What are contaminations?
Contamination can be of various forms: limestone, tar and iron and can only be eliminated with a specific product for each type of contamination.
If the car is completely contaminated with limescale, how can I proceed?
Proceed first with a thorough wash with Foam Gun Prewash or in the case of black or wrapped cars with Black&Wrap Shampoo. If necessary, spray Water Spot Mineral Remover on the washing glove and pass it over the bodywork.
Should Water Spot Remover be used on a dry or wet car?
It depends: on a dry surface when localized contamination is present. On a wet car, in the presence of widespread and large contamination or on the windows.
Why is it important to remove limescale from the surface?
Because it opaques the color and penetrates the transparent bodywork, staining it deeply, it also stains the windows and does not allow good visibility.
How much product can I apply to the bodywork?
The less product you apply, the less effort you will have. We therefore recommend dispensing a little product per panel and proceeding with the application with the microfibre cloth and subsequent finishing with the second cloth. The quantity of the product dispensed does not affect the lasting performance. In this case the rule “less is […]
How many cloths do I need to apply CERAMIC ULTRA SPEED WAX?
You will always need 2 cloths. With the first, proceed with applying the protective layer, with the second, proceed with removal. Take care that the second cloth does not become soaked in the removed product to avoid residues that cause halos and streaks. In this case, use another clean, dry microfibre cloth.
Why is it recommended to alternate the two shampoos?
To prevent too much protective layering on the surface, saturating the paint. In fact, an excess of product is rejected by the surface with the risk of creating streaks.
How to maintain the performance of CERAMIC ULTRA SPEED WAX for longer?
We recommend washing the car by alternating the use of Neutral Foam Shampoo (used in foam as a pre-wash and as a manual wash shampoo) and alternating it every 2 washes with Ceramic Shampoo.